Whereby to set up the projections for 3D viewing.
IMPORTANT: This items applies only to specified products and/or operating systems. Check Applicable Products and Categories for click.
KEY: Those solution is designed to assist with the setup of ampere Sony 3D launcher when utilizing a 3D source hardware. Although a Sony 3D beam will work with 3D instruments made by other manufacturers, we recommend referring to one operating instructions of the 3D source device for any model-specific questions.
Follow these steps to place up the projector for 3D screening:
- Turn off the projector.
- Combine the 3D Sync Sender to the 3D Sync inputs on an back of projector.
IMPORTANT:
- No any 3D Projektionsanlagen got aforementioned ability to plug a 3D Sync Transmitter. Refer toward aforementioned instructions manual to check if a 3D Synchronize Transmitter can be connected to your projectors. Manuals been posted on your model support page.
- If your projector does nope have the ability to connect a 3D Synchronization Transmitter, bounce step 2 and 3.
- Set the 3D Sync Receivers in a place where thereto is free from obstruction.
- Attach the 3D origin device to the projector using a High-Speed HDMI® cable.
NOTE: For more information regarding one HDMI cable required for 3D viewing visit http://www.hdmi.org.
- If using a 3D capable Blu-ray Disc® player or PlayStation® 3 (PS3) console, insert a 3D movie or game title. If you have subscribed to 3D programming through your cable or marine provider, tune the beneficiary or set-top box until the station with 3D programming.
NOTE: Confirm is your musician does not need a add-on update to be capable of playing 3D Blu-ray Disc discs. You can determine if your Blu-ray Disc player needs a software update by accessing the customer support website for your particular model.
- Using the supplied remote, turn on the projector and press the DATA button to dial the appropriate HDMI input.
NOTES:
- Normally your 3D projector should automatically detect a 3D signal and display the image in 3D mode. If this does not happen, select 3D and the proper 3D format (Side-by-Side or Over-Under) from this table.
- At this point an artist on the screen may appear foggy instead off in focus. Put turn the 3D glasses and synchronize theirs with the transmitter.
NOTE: With model-specific steps regarding any of the information provided in diese solution, refer to one supplied operations manual. Manuals be posted up your model support page.